top of page
20220729_133853.jpg

over 40 years
Saw and Blade Sharpening specialist

NATIONAL PICKUP AND DELIVERY SERVICE

Full sharpening service of saws and blades used for all industrial and domestic applications  

Sharpening Enquiry Form

25% More Cuts Per Sharpen!

Anchor 1
20220729_133853.jpg

The only TCT 200 sawing system in NZ

​

ASL Industries is the only company in New Zealand that offers the TCT 200 sawing system. There are many advantages to using the Hypercut (Thin Kerf Blading) or TCT 200 Sawing System. Tungsten carbide tips are designed for ultimate wear resistance. The system is adapted to suit all types of band saw blades for wood and designed specifically for your cutting application. 

 

These blades last four times longer than conventional blades, resulting in much longer operational times between servicing saw blades. They produce less waste and give a better quality cut. This will greatly improve your Saw Shop’s efficiency and, ultimately, your profitability.

NATIONAL PICKUP AND DELIVERY SERVICE

We are committed to delivering the best service in our industry. With ASL Industries nationwide industrial blade pickup and delivery service. You will receive your blades as quickly as possible to minimise downtime.

home-pickup-and-delivery.jpg
Delivery

Our Process

01

Receiving Your Blades

Your blades are received and checked into our system, where you receive an automated email. We then immediately laser etch your name on the front of the blade so that it stays linked to you, from the second we receive it.

download.png

02

Polishing and Cleaning

All blades are cleaned in an ultrasonic bath and wire buffed if required. The ultrasonic bath helps loosen debris and the wire wheel helps clear any surface debris away from the tooth.

download.png

03

Measuring and Inspection

Once cleaned, your blades are measured up and sorted into our work flow for one of our 10 CNC saw grinders. We inspect blades prior to going on our machine. We note significant run out and mark it on the blade so that we can correctly grind your blade into proper shape. Any blade needing benching, tip work or that cannot be ground, are repaired if possible or weeded out at this point in the process.

335446.png

04

Grinding

Your blades are top and face ground. We have 2 dedicated facing machines and 4 machines that can do both grinds in a single cycle. Once ground, we again visually inspect the blade, to ensure it is within the specification for your saw as well as checking for any run out.

istockphoto-1299225343-612x612.jpg

05

Shipping

Blades are dipped in a wax protective coating prior to shipping back. If you sent your blades in boxes, or a special case, you will receive these back. If not, your blades are shipped in our custom boxes designed for saw blade shipping and are separated by cardboard dividers custom made to fit the profile of our shipping box.

free-truck-icon-1058-thumb.png

Respond Time

The time taken to reply to customer requests will fall within 24 hours.

bottom of page